Lots of tiny leetl Mamod's and Accucraft's and Jensen's and whatnot. A Coccophany of swinging-cylinder noise! Most steam at the Karnes household in a long while, too.

Views: 151
Duration: 40 seconds

Tim driving is Lucky 7.

Views: 127
Duration: 43 seconds

1 inch minnie traction engine ive just finished building.

Views: 7,996
Duration: 05:53

cabinfeverexpo.com 15th Annual "CABIN FEVER EXPO 2011" Model Engineering Show & Auctions The Show For The Metal Working Hobby SHOW January 15th & 16th, 2011 CONSIGNMENT AUCTIONS: Friday, January 14th, 2011 Saturday, January 15th, 2011 @ 11:00AM Paul Seachrist's Engine Collection Saturday, January 15th Semi-Silent Auction In The Toyota Arena at The York Fairgrounds & Expo Center 334 Carlisle Ave. York, PA 17404 The "CABIN FEVER EXPO 2011" Model Engineering Show Includes: • DISPLAYS OF ALL TYPES OF MODEL ENGINEERING: Gas & Steam Engines • Hot Air Engines • Airplanes • Boat Pond Boats • Trains • Cars • Live Steam Trains • VENDOR SALES AREA: Over 100 Vendor...

Views: 2,325
Duration: 49 seconds

24 volt dynamo driven by hercules horizontal slidevalve engine, powered by twin stuart 504s. dooya like the big end lubricator! suplies a continuous supply of oil to the crankpin bearing.

Views: 4,636
Duration: 06:03

Built this boiler from some plans I got from an old Polular Mechanics do it yourself encyclopedia set and the engine was bought from an antique store. The boiler is made from plumbing parts that I picked up at the hardware store and the only part that was really designed for a steam engine was the safety valve since I did not feel safe making my own so I bought one from a company who makes model steam engines. Dang my camera is bad in low light

Views: 133
Duration: 14:46

Maiden voyage of "Mercury", a Krick Victoria steam launch, powered by a Regner Midi steam plant. Built over first few months of 2008. Flickr Set: www.flickr.com

Views: 20,653
Duration: 45 seconds

High volume boiler, 110 volt AC 1440 watts of power heats water from cold to 30 PSI in 10 minutes. Has electrical pressure switch that allows for fingertip adjustment from 10 psi to 100 psi (though paired PM research safety valves blow at 60 psi). Will maintain a continous flow of steam via two regulator valves, also has a PM research steam guage and whistle. Jacketed/insulated boiler stays just warm to the touch on exterior. Shown here set to 30 PSI and operating a small model turbine.

Views: 6,362
Duration: 01:29

One inch to a foot scale model of a Steam Engine used to run a lead works. This is a replica of an engine on display at the Henry Ford Museum in Dearborn Michigan

Views: 11,892
Duration: 15 seconds

Dual Cylinder Model Steam Engine Rear Paddle Wheeler NAMES 2006

Views: 20,615
Duration: 21 seconds

Jensen Steam Turbine Engine Model # 95 G

Views: 111,226
Duration: 13 seconds

One of smallest live-steam model car. ライブスチームの小型３輪車です。 小さな固形燃料で１分ちょっと走ります。 後はマモッド製のスチームカーで全長４０センチほどあり、大きさの違いが分ると思います。

Views: 11,749
Duration: 43 seconds

www.mainsteam.co.uk Short extract from my "How to Build a Model Steam Launch" 3 DVD set - over 5 hours of video instruction which is available in NTSC & PAL formats from my "Mainsteam" website. This is a preview of a tiny section of "How to Build a Model Steam Launch" This small section covers the start of the construction of the brass ladder frame that the steam engine plant is mounted on for use in a model steam boat. The finished set of DVD's cover every aspect of building a model steam launch in very fine detail - but using very simple & easy to understand language for beginners to the hobby.

Views: 171
Duration: 01:50

Precision, Detail, Vertical Cylinder Model Steam Engine, 1 NAMES 2006 North American Model Engineering Society North American Model Engineering Exposition

Views: 32,702
Duration: 38 seconds

The power chassis demonstration, both axles powered gives excellect tractive effort even with only 60lbs of weight. Visit www.RideTrains.net to purchase.

Views: 481
Duration: 01:14