just finished thresher,coupled to engine to see how it performs,i built the engine last winter,ballraced crank on engine and all shafts on thresher makes for easy running.morecoming soon.

Views: 1,853
Duration: 03:08

model portable engine driving a model sawbench,both engineered in my workshop.

Views: 3,465
Duration: 07:40

First run of the steam plant post boiler test. This steam plant is fitted to a semi scale model of Ben My Chree, one of the many ferries operated by the Isle of Man Steam Packet Co. Ben My Chree was in service pre WW1 and before being lost in service as an aircraft carrier in WW1. This model was built in 1936, being launched as a straight runner in 1938. The model is 5ft long and weighs 50lb. The hull is yellow pine carved from the solid. The boiler is the water tube type, fired with a petrol blow lamp and is run at 75psi. A single cylinder 7/8" bore and stroke engine drives a pair of contra rotating props through a gearbox, which also provides drive for a gear driven lubrication pump, for...

Views: 2,078
Duration: 01:48

Gauge One 1:32 scale model live steam locomotive powered by a steam turbine engine.

Views: 36,919
Duration: 05:27

The layout is starting to develop... lots more work to do...

Views: 7,388
Duration: 02:11

Gauge One 1:32 scale model live steam locomotive operating with a turbine engine. Diamondhead Steamup 1995.

Views: 10,534
Duration: 01:23

The fabulous Hornby Live Steam in action in the living room. Film by Derek Wilson of www.worldstagesteam.co.uk

Views: 43,307
Duration: 02:09

First try at recording my Hornby Mallard on my layout.... listen to the wonderful little 'bark' as she pulls up the incline.

Views: 11,881
Duration: 01:01

SOUTHERN PACIFIC 2-10-2 LIVE STEAM 1:32, 45MM GAUGE ACL - CUSTOM BUILT BRASS MODELS Scale: 1:32 Scale, 45mm Gauge Minimum Radius: 3 M (120 in.) Length: 37 3/8 in (950 mm) Width: 4 3/8 in (111 mm) Height: 6 3/8 in (162 mm) Weight: 8.2 kg (18 lbs.) Fuel: Butane Boiler Pressure: 60 psi Cylinder: Two Cylinders w/D-valve Valve Gear: Walschaerts valve Fittings Water Level glass, Check valve, Axle water pump, Hand water pump in tender Special Thanks to Dan Liebowits for use of his great layout

Views: 4,697
Duration: 03:27

D&RGW K-36 2-8-2 1:20.3 SCALE, 45MM GAUGE LIVE STEAM ACL (Accucraft Custom Line) is proud to announce the production of live steam D&RGW K-36 in 1:20.3 scale and 45mm gauge. Like other fine products form Accucraft, these models will be meticulously handcrafted from brass and stainless steel. TECHNICAL SPECIFICATIONS Scale/Gauge - 1:20.3 Scale/ 45mm Gauge Minimum Radius - 1.2 M, 48 in. Fuel - Butane Cylinder - Two Cylinders w/ D-side valve Valve Gear - Walschaerts valve Fittings - Throttle, Check vlave, Water level gauge, Pressure gauge Limited Production Special thanks to Dan Liebowits for the use of his great layout.

Views: 4,278
Duration: 03:36

Out searching for steam at the Colorado Railroad Museum Catching a meet of some Fine Accucraft live steam models a 2-8-0meet with a Mimi highballing a full load when a Narrow Gauge RioGrande baldwin rounds the curve by the water tower! needless to say I joined the DGRS on the SPOT ! www.denvergrs.org Its also the Host of the 2009 Garden Railway Convention www.2009ngrc.com And Keep It Steamed Up Friends

Views: 3,335
Duration: 43 seconds

Very early and fine example of a Jensen Steam Engines Style #50 running on live steam.

Views: 25,456
Duration: 13 seconds

Model Live Steam Tram By Charles McMillan Denver Garden Railway Society Steam Track Colorado Railroad Museum

Views: 268
Duration: 03:53

Over 255 hours of fabrication labor condensed down to 47 seconds. This is a Kozo Hiraoka designed tender for a Pennsylvania A3 switching locomotive. This model is in 3/4 inch to the foot scale. Made from steel, stainless steel, brass and copper.

Views: 2,873
Duration: 47 seconds

3 Examples of live steam models built on an Atlas six inch lathe.

Views: 53,051
Duration: 04:27